Sr No

Category

Points Raised

Clarification

I.a

Service Provider

Who is the Service Provider for NMCE ?

HCL Comnet & Bharti Air Tel are the VSAT service provider for all locations for installation and technical support, HCL & Bharti officials would personally call on the members’ site.

I.b

Link Type

What are VSAT specifications ?

Extended-C Band with 1.2 mtr Dish Antenna. VSAT Bandwidth-both Interactive and Broadcast.

I.c

Linkages to more than one Exchange

Whether the existing VSAT(linking to BSE or NSE) could be utilized for NMCE connectivity too ?

No. HCL VSAT Hub located at Noida (UP) & Bharti VSAT Hub located at Bangalore, are independent of any other exchange. NMCE VSAT network operates on a unique network that  can’t be  inter-linked with another network.

I.d

Commercials

What charges are required to be paid for VSAT connectivity ?

NMCE has negotiated the best price with Bharti, Which is split into the following three components :
I-One Time installation cost of Rs. 80,000/- (Sales Tax / VAT Inclusive, Octroi/Entry Tax & Other Taxes Extra).
II-Annual Bandwidth cost of Rs. 5,000/-
III-AMC is payable at Rs. 6,400/-(Taxes Extra) p.a. from the second year.

I.e

Surrender of VSAT

What amount is refunded on surrender of VSAT link ?

Pls. refer Exchange Circular No.2004-05/0019 for KU Band VSAT Policy. No refund in case of Ext-C Band VSAT available

I.f

Shifting of VSAT

Can the VSAT be shifted to another location due to change of premises ?

Yes, HCL Or Bharti engineers would undertake shifting work to another site on chargeable basis, Which would be borne by the member. Details of this would be available from HCL or Bharti The following rates have been agreed for shifting HCL COMNET :
Installation – 5,000 + Taxes
De-Installation – 4,000 + Taxes
Transportation – Actual
BHARTI AIRTEL:-
Shifting Charges Same Building  
De-Installation – Nil
Re-Installation  3,000 + Taxes
Different City
De-Installation – 3,000 + Taxes
Re-Installation – 3,000 + Taxes
Transportation / Packing – On Actuals

I.g

Network equipment

What type of equipment is required to be procured for VSAT connectivity ?

VSAT antenna and electronics, which includes IDU (In-Door Unit) and   ODU.IDU is connected using IFL cable to the ODU.IDU is also linked to the  Ethernet port of a hub or switch connecting the internal    LAN.IFL cable is provided by HCL or Bharti. The Other requirement for site readiness would be specified by HCL or Bharti engineer during the site survey. Local Cabling work should be carried out by the member.

I.h

Number of Users

How many users can work using a single VSAT ?

5 terminals can operate seamlessly on SSA VSAT. It is recommended not to connect more than five terminals. akin to VSAT set-up for NMCE trading. 20 terminals can operate on Sky Edge technology.

I.i

Recommended Configuration of Front-end terminals

What type of PCs is required for a trading terminal ?

Pentium IV or above with 256 Mb RAM. HDD Min. free space 2Gb.Windows 2000 Professional with service pack 4.

I.j

Getting Connected

What is the process for applying for VSAT based connectivity ?

After approval of membership, a letter confirming number of VSATs required (location-wise) needs to be forwarded to Membership Department of NMCE. This should accompany purchase Order with NOC,CST/LST declaration, Demand drafts, Site Status report and any other document specified (List of documents required for various states is provided in Annextures) Formats for various documents are give Annexture-2 to 6.NMCE would process the connectivity request and advise Bharti would deliver, Install and connect the terminals at member’s site.

I.k

Turnaround time for installation

What is the time required for VSAT installation ?

Bharti moves the stock from their office. It would take about a 15 to 20 days  depending upon the location and other factors like waybill or road permit availability.

I.l

Trouble Shooting

In Case of a connectivity problem, Whom to refer ?

The connectivity will be online monitored at NMCE. In case of any degradation or disconnection, the HELPDESK team could be reached at 079-40086039/40.

Sr No

Category

Points Raised

Clarification

II.a

Service Provider

Who are the service providers for NMCE ?

All terrestrial links are connected through BSNL, MTNL, Reliance & Bharti.

II.b

Link Type

What bandwidth is required for leased line connectivity ?

64 Kbps and multiples thereof. In metro/large centers, this is provided through MLLN/MLDN channels.

II.c

Number of Users

How many users can be connected using one channel of 64 Kbps ?

25 to 30 users can work seamlessly on a normal dedicated leased line.

II.d

Recommended Confuguration of Front-end terminals

What type of PCs is required for a trading terminal ?

Pentium IV or above with 256 Mb RAM. HDD Min. free space 2Gb.Windows 2000 Professional with service pack 4.

II.e

Network equipment

What type of equipments is required to be procured  for leased Circuit data Connectivity ?

(a) 64 kbps MLLN Leased Line Modem.
(b) Cisco 1721(10/100 T) modular router with 2 WAN slots. V.35 cable, DTE Male to smart serial-10 feet
(c) 2-port serial WAN interface card & 1 port ISDN BRI S/T port.
(d) Cisco 1721 IOS IP/ADSL plus IPSEC3DES,IOS  IP/ADSL plus IPSEC3DES,IOS Version 12.(15) ZL for multicast.
(e) DRAM-64MB, Flash 32 Mb
(f) LAN switch or Hub.
Only one set of modem is required at member-end in case of  MLLN/MLDN/MPLS circuits. Member has to procure either RAD ASM20 or ASM31 modem depending on telephone exchange type in case Telephone exchange are not able to supply modems.

II.f

Linkages to more than one Exchange

Whether the existing leased line (linking to BSE or NSE) could be utilized for NMCE connectivity ?

Where a router provides for connecting multiples 64 kb ports, termination of multiple 64 kb link would be technically feasible. However,1) it is recommended to have a separate router, Switch/Hub for each exchange 2)prior CUG approval would be required from DoT for interconnecting multiple networks on a single router, For trading, dedicated terminals would be required.

II.g

Getting Connected

What is the process for applying leased link connectivity ?

Upon approval of membership, a letter confirming desired number of leased links needs  be sent to Technology Department. NMCE would fill-in and complete the LL applications form with “End-A” local address and “end-B” address of the trading member. The application would be submitted by NMCE to respective telephone exchanges for issue of demand note and work order. All payments would be made to BSNL/NMCE directly by the member.

II.h

Connectivity Documentation

What documents are required for leased line connectivity ?

Two main documents, the first is an undertaking signed by Co.’s authorized signatory on the letter head stating the address at which the leased line would terminate. The second document is a CUG requirement and is an undertaking on a non-judicial stamp paper worth Rs. 300/-. Format of both these undertaking are provided on our website & also in Circular No.2007-08/0028

II.i

Turnaround time for installation

What is the time required for link installation ?

Depending upon the exchange capacity & link availability the average commissioning time is about 4 to 5 weeks.

II.j

Commercials

What charges are required to be paid for 64 kbps leased connectivity?

The entire end to end link cost to be borne by the member which would be payable to BSNL as per their schedule of tariff plus Cisco Router cost.

II.k

Shifting/Surrendering of links

Is it possible to shift or surrender the leased line ?

Yes, This is similar to shift of telephone lines payable as per BSNL tariff. The request needs to be routed through  NMCE Ahmedabad.

II.l

Additional Capacity

How is it possible to increase the bandwidth ?

The bandwidth could be upgraded in multiples of 64 kbps. A similar process (like applying for a new link) needs to be followed.

I.m

Trouble shooting

In Case of a connectivity problem, Whom to refer ?

The connectivity will be online monitored at NMCE. In case of any degradation or disconnection, the HELPDESK team could be reached at 079-40086039/40.

II.n

ISDN Connectivity

Whether ISDN dial-up connectivity is provided ?

No.
NMCE has not configured the network infrastructure to connect ISDN equipment for trading purpose.

Sr No

Category

Points Raised

Clarification

III.a

Service Provider

Who are the service providers for NMCE ?

All terrestrial links are connected through BSNL links.

III.b

Link Type

What bandwidth is required for leased line connectivity ?

3 Categories Gold / Silver / Bronze. In metro/large centers, this is provided through MLLN/MLDN channels.

III.c

Number of Users

How many users can be connected in various   categories ?

11-20 Users can be connected in Gold Category, 7-10 Users can be connected in Silver Category, 4-6 Users can be connected In Bronze Category

III.d

Recommended Configuration of Front-end terminals

What type of PCs is required for a trading terminal ?

Pentium IV or above with 256 Mb RAM.  Min. free space 2Gb in HDD. Windows 2000 Professional with service pack 4.

III.e

Network equipment

What type of equipments is required to be procured  for leased Circuit data Connectivity ?

(a) Cisco 1721(10/100 T) modular router with 2 WAN slots. V.35 cable, DTE Male to smart serial-10 feet
(b) 1-port serial WAN interface card & 1 port ISDN BRI Card
(c) Cisco 1721 IOS IP Version 12.2 or above
(d) DRAM-64MB, Flash 32 Mb
(e) LAN switch or Hub
Only one set of modem is required at member-end in case of  MLLN/MLDN/MPLS circuits. Member has to procure either RAD ASM20 or ASM31 modem depending on Telephone Exchange type, in case Telephone Exchange are not able to supply modems

III.f

Linkages to more than one Exchange

Whether the existing leased line (linking to BSE or NSE) could be utilized for NMCE connectivity ?

Where a router provides for connecting multiples 64 kb ports, termination of multiple 64 kb link would be technically feasible. However,1) it is recommended to have a separate router, Switch/Hub for each exchange 2)prior CUG approval would be required from DoT for interconnecting multiple networks on a single router, For trading, dedicated terminals would be required.

III.g

Getting Connected

What is the process for applying leased link connectivity ?

Upon approval of membership, a letter confirming desired number of leased links needs  be sent to Technology Department. NMCE would fill-in and complete the LL applications form with “End-A” local address and “end-B” address of  the trading member. The application would be submitted by NMCE to respective telephone exchanges for issue of demand note and work order. All payments would be made to BSNL/NMCE directly by the member.

III.h

Connectivity Documentation

What documents are required for leased line connectivity ?

Three main documents, the first is an application  specifying which service (Gold/silver/Bronze) one wants to opt for. It’ll also have the details of the demand draft. Second, is an undertaking signed by Co.’s authorized signatory on the letter head stating the address at which the leased line would terminate. The third  document is a CUG requirement and is an undertaking on a non-judicial stamp paper worth Rs. 300/- Format of both these undertaking are provided on our website & our Circular  No. 2007-08/0028 dated 06-07-2007

III.i

Turnaround time for installation

What is the time required for link installation ?

Depending upon the exchange capacity & link availability the average commissioning time is about 4 to 5 weeks.

III.j

Commercials

What charges are required to be paid for 64 kbps leased connectivity?

The link cost is to be borne by the member which would be payable to BSNL as per their schedule of tariff plus Cisco Router cost. The cost are also provided in our Circular No.2007-08/0028 dated 06-07-2007

III.k

Shifting/Surrendering of links

Is it possible to shift or surrender the leased line?

Yes, This is similar to shift of telephone lines payable as per BSNL tariff. The request needs to be routed through NMCE Ahmedabad.

III.l

Additional Capacity

How is it possible to increase the bandwidth ?

The bandwidth could be upgraded in multiples of 64 kbps or to the category. A similar process (like applying for a new link) needs to be followed.

III.m

Trouble shooting

In Case of a connectivity problem, Whom to refer?

The connectivity will be online monitored at NMCE. In case of any degradation or disconnection, the HELPDESK team could be reached at 079-40086039/40.

III.n

ISDN Connectivity

Whether ISDN dial-up connectivity is provided ?

No.
NMCE has not configured the network infrastructure to connect ISDN equipment for trading purpose.